BC Custom - Carbon Fiber Shroud & Tensioner Kit, FX Impact M3 w/ FX Clamp, 800mm

BC Custom Carbon Fiber Shroud & Tensioner Kit for FX Impact M3 with FX Clamp, 800mm - Ultimate Performance Enhancement

Introduction

Elevate your shooting precision with the BC Custom Carbon Fiber Shroud & Tensioner Kit for the FX Impact M3, specifically tailored for the 800mm barrel with an FX Clamp. This collaboration between Bullet Central and Ernest Rowe delivers a cutting-edge solution designed to enhance your airgun by significantly reducing weight and increasing barrel stiffness and rigidity.

What's Included in the Kit

• Tension Nut: Crucial for securely fastening and stabilizing the assembly.
• Carbon Fiber Shroud: Enhances barrel stiffness while maintaining a lightweight profile, thus improving overall performance.
• Tensioner: Adds necessary tension to the barrel, further enhancing its rigidity.

Choosing the Right Kit

• With Clamp: If your FX Impact M3 is equipped with a clamp, opt for the tensioner kit that includes a clamp for a secure and optimal fit.
• Without Clamp: For FX Impact M3 models that do not have a clamp, select the standard tension kit. It is essential to choose the appropriate kit based on your airgun’s specific configuration.

Installation Guide

1. Remove Existing Barrel: Start by unscrewing and removing the barrel from your FX Impact M3.
2. Identify Tensioner Ends: Locate which end of the tensioner has a recessed cut — this should point downrange when installed. The other end, which is smooth, should slide on first towards the rifle.
3. Install the Tension Nut: Attach the tension nut to the recessed end of the tensioner. Tighten securely using a 2mm Allen key inserted through the designated hole in the nut.
4. Position the Shroud: Slide the carbon fiber shroud over the tensioner. An O-ring inside the shroud ensures a tight fit, crucial for maintaining an effective air seal.
5. Secure the Shroud: Screw the shroud onto the tensioner nut until it feels snug and is fully secured, ensuring it is aligned properly.

Benefits of the Carbon Fiber Tensioner and Shroud

• Weight Reduction: The lightweight nature of carbon fiber significantly decreases the overall weight of the airgun, enhancing ease of handling and maneuverability.
• Increased Stiffness and Rigidity: This kit not only adds stiffness to the barrel but also minimizes vibrations, thereby improving the accuracy and consistency of your shots.

Conclusion

The BC Custom Carbon Fiber Shroud & Tensioner Kit for the FX Impact M3 with FX Clamp and an 800mm barrel is a critical upgrade for anyone serious about optimizing their airgun's performance. This kit not only improves the structural integrity and stability of the barrel but also enhances precision and handling, making it a worthwhile investment for competitive shooters and airgun enthusiasts alike. With its superior design and high-quality materials, this kit ensures your FX Impact M3 performs at its highest potential, delivering reliability and accuracy with every shot.