GRS Rifle Stocks - Lightweight Classic Tikka T3/T3X LH, Nordic Wolf (106316)

GRS Lightweight Classic Stock, Tikka T3 / T3X Left Hand, Nordic Wolf

The Lightweight Classic is the lightest laminate stock GRS builds. It comes in at roughly 900 grams, which puts it in mountain-rifle territory while keeping the adjustability GRS is known for. This one is inlet for Tikka T3 / T3X Left Hand and finished in the grey-and-black Nordic Wolf laminate with an oiled surface. This is the left-hand inlet, cut for left-hand Tikka T3 and T3X actions.

The grip is an ambidextrous classic profile with laser-engraved texturing, so it works for right or left hand shooters. Adjustment is deliberately simple to save weight: a push-button cheekpiece with 30 mm of travel, and length of pull built out with spacers rather than a mechanism. Base length of pull is 32.5 cm, and spacers take it out another 4 cm. If you want a stock that fits you properly but you count every ounce on a stalk, this is the GRS to look at.

Specifications

• Length of pull: 32.5 cm base, extends up to 4 cm with spacers
• Total length: 70 cm
• Fore-end width: 45 mm
• Weight: approximately 900 g, plus or minus 5 percent by inlet (868 g on the Tikka T3 inlet)
• Cheekpiece adjustment: push-button, 30 mm of travel
• Material: birch laminate, oiled finish
• Barrel channel: standard slim profile, same as Hunter Light and Thumbhole
• Max caliber: .338 Lapua Magnum
• Glass bedding: recommended on all GRS laminate stocks for best accuracy
• Inlet: Tikka T3 / T3X Left Hand
• Hand: Left hand inlet, ambidextrous grip

Fit Notes

The Lightweight Classic uses a slim barrel channel. If your barrel is a heavier contour than a factory sporter, measure before you order. Spacer kits and the GRS rear bag are sold separately.

What's in the Box

GRS Lightweight Classic stock, owner's manual, and GRS decals. Two sling studs are fitted as standard.